Thrie-Beam Guardrail
Thrie-Beam™ has an added corrugation that gives an advantage for use in transitions to bridges and along high volume, high speed roadways.
Product Description
Thrie-Beam™ has an added corrugation that gives an advantage for use in transitions to bridges and along high volume, high speed roadways.
Manufacture
Thrie-Beam™ is roll formed from coil steel and sheared to length. It is then punched, slotted to suit the particular configuration and hot dip galvanised in accordance with AS/NZS 3845.
Thrie-Beam™ is available ex-stock in standard effective lengths of 4.00 metres and 2.00 metres.
Profile
The standard straight section will align to give a smooth transition on curved with a radius greater than 45m. Pre-curved Thrie-Beam™ is required for tighter radii and may be curved to traffic face concave or convex.
Features:
Thrie-Beam features 'three' waves across its section versus 'two' on W-Beam and therefore provides greater rigidity, which in turn means lower deflections and higher containment that is more suitable for heavier vehicle protection.
Downloadable Resources:
Thrie Beam Assembly, Standard Blockouts RTA - NSW
Thrie Beam Assembly, Standard Blockouts Main Roads - QLD
3.5mm Thrie Beam Assembly, Standard Blockouts RTA - NSW
Specifications:
- Specifications differ between States, refer to technical drawings and to the local specifications and drawings register for your local state road authority available online.
Standards and Approvals:
- Thrie-Beam™ complies with the requirements of: AASHTO NCHRP350.
- TL-3 and TL-4 when used as an approved system.
- AS/NZS 3845 - Road safety barrier systems.
- Approved by State Roading Authorities.