The EROWeb® Geocell is a 3 dimensional expandable cellular confinement system of various depths made from HDPE. It is used to confine various infill’s and provide stability on slopes and channels. Offers unique, eco friendly solutions for various civil engineering challenges.
Engineered for diversity, EROWeb® Geocell can be utilised in various sectors such as roads, railways, ports and others.The EROWeb® Geocell is perfect for construction and saving money. They can be filled with locally sourced material, a cost saving, especially in remote locations where aggregates require importation. It can be used for Erosion control; this enables vegetation to re-generate in difficult areas, preventing wash out zones.
The EROWeb® Geocell is also perfect for un-paved roads. This means an access road can be built in most locations during construction zones, and much more economical than building a permeant road structure. It can also be used to reinforce structures, build up the foundation, and as a retaining wall. It can be used for Erosion Control; this enables vegetation to re-generate in difficult areas, preventing wash out zones. It is also perfect for un-paved roads.
This means an access road can be built in most locations during construction zones, and much more economical than building a permeant road structure. It can also be used to reinforce structures, build up the foundation, and as a retaining wall.
Applications:
- Embankments
- Paved/Unpaved Roads
- Landfills
- Canal/Reservoirs
- Railways and Ports
Specifications
| Properties | Unit | Test Method | Values |
| Polymer Density | g/cm3 | ASTM D 1505 | 0.935-0.965 |
| Environmental Stress Crack Resistance | hrs | ASTM D 1693 | >5000 |
| Carbon Black Content | % | ASTM D 1603 | min. 1.5 |
| Nominal Sheet Thickness | mm | ASTM D 5199 | min. 1.52 |
| Material | Compound of various Polyethylenes and additives |
| Texture | Polyethylene strip consists of a multiple rhomboidal indentations over the entire strip area on both sides of the strip. The indentations have a surface density of 22 to 32 per cm2 |
| Perforations | Polyethylene Strip is perforated with horizontal rows of maximum 10 mm diameter holes. Cell perforations are is less than 12% of cell surface area |
| Cell/Section Properties | | | |
| Weld Spacing | mm | - | 445 |
| Cell Depth | mm | - | 75, 100, 125, 150, 200 |
| Expanded Cell Dimensions (+3%) | Width - mm Length - mm | - | 320, 287 |
| Expanded Cell Area (+3%) | m/s | - | 460 |
| Nominal Expanded Section (+3%) Width - mm | Width - mm Length - mm | - | 2.56, 8.35 |
| Nominal Expanded Section Area (+3%) | m2 | - | 21.4 |
| Seam Properties Cell Depth | | | |
| Seam Peel Strength (EN ISO 13426-1, | mm | - | 75 100 125 150 200 |
| Method B: Peeling Test) | N | - | 1065 1420 1775 2130 2840 |
