EROWeb StrataWeb Geocell 100 - 2.56x8.35m

EROWeb Geocell is a Cellular Confinement Systems (CCS), offering advanced soil stabilisation technology, commonly installed to support load, erosion control, slope stability, and other applications.
SKU: SW445-100
Request a quote

Product Description


The EROWeb® Geocell is a 3 dimensional expandable cellular confinement system of various depths made from HDPE. It is used to confine various infill’s and provide stability on slopes and channels. Offers unique, eco friendly solutions for various civil engineering challenges.

Engineered for diversity, EROWeb® Geocell can be utilised in various sectors such as roads, railways, ports and others.The EROWeb® Geocell is perfect for construction and saving money. They can be filled with locally sourced material, a cost saving, especially in remote locations where aggregates require importation. It can be used for Erosion control; this enables vegetation to re-generate in difficult areas, preventing wash out zones.

The EROWeb® Geocell is also perfect for un-paved roads. This means an access road can be built in most locations during construction zones, and much more economical than building a permeant road structure. It can also be used to reinforce structures, build up the foundation, and as a retaining wall. It can be used for Erosion Control; this enables vegetation to re-generate in difficult areas, preventing wash out zones. It is also perfect for un-paved roads.

This means an access road can be built in most locations during construction zones, and much more economical than building a permeant road structure. It can also be used to reinforce structures, build up the foundation, and as a retaining wall.

Downloadable Resources:

EROWeb® Geocell - Product Spec Sheet

Applications:

  • Embankments
  • Paved/Unpaved Roads
  • Landfills
  • Canal/Reservoirs
  • Railways and Ports

Specifications

PropertiesUnitTest MethodValues
Polymer Densityg/cm3ASTM D 15050.935-0.965
Environmental Stress Crack ResistancehrsASTM D 1693>5000
Carbon Black Content%ASTM D 1603min. 1.5
Nominal Sheet ThicknessmmASTM D 5199min. 1.52
MaterialCompound of various Polyethylenes and additives
TexturePolyethylene strip consists of a multiple rhomboidal indentations over the entire strip area on both sides of the strip. The indentations have a surface density of 22 to 32 per cm2
PerforationsPolyethylene Strip is perforated with horizontal rows of maximum 10 mm diameter holes. Cell perforations are is less than 12% of cell surface area
Cell/Section Properties   
Weld Spacingmm-445
Cell Depthmm-75, 100, 125, 150, 200
Expanded Cell Dimensions (+3%)Width - mm Length - mm-320, 287
Expanded Cell Area (+3%)m/s-460
Nominal Expanded Section (+3%) Width - mmWidth - mm Length - mm-2.56, 8.35
Nominal Expanded Section Area (+3%)m2-21.4
Seam Properties Cell Depth   
Seam Peel Strength (EN ISO 13426-1,mm-75 100 125 150 200
Method B: Peeling Test)N-1065 1420 1775 2130 2840
Products specifications
Attribute nameAttribute value
U.O.MEach