Introducing FastRock! Flexible Rope Net Gabions (FRN)
Flexible Rope Net Gabion
Flexible Rope Net Gabion are made from polyester yarn, HDPE or other suitable polymers. The product consists of netting and polymer ropes which are fabricated together in controlled environment. It comes with a lifting ring which aids in connecting the bag safely with lifting equipment.
Polymers are inert to corrosive coastal environment; these gabions are highly preferred for under water and coastal protection works. Boulder fill can be done in-situ or gabions can be prefilled and installed in place with the help of suitable equipment. These gabions after filling are placed adjacent to each other to form a continuous structure. Based on the test reports from BTTG-Shirley Tech UK, we can offer products with 25 years or 50 years design life when covered and maintained as stipulated on EN/ISO/BS codes.
Single point lifting make handling the bag easy after filling for placing in desired location or site.
- Installation along river banks and streams to control erosion and also help the sustainable vegetation to grow and integrate into the environment.
- Forged and extremely strong lifting ring with safe working load test certificates.
TYPICAL MATERIAL SPECIFICATIONS
This is only a general guide for installation – consult the engineering teams on site for site specific solutions.
FRN Gabion preparation steps:
Fix the FRN Gabion into the specified tonnage/Volume frame for filling which should not have sharp edges at corner or we recommend a pipe structure and a rubber strip placed at all contact points between the netting and filling frame so that product damage is avoided.
Fill and level the boulders
Choose the boulders as per the mesh size table provided. Fill the FRN Gabion with stones. Ensure stones having density of minimum 2.6g/cm3. Generally encouraged to use the stones at site to reduce lead and lift. Ensure no sharp edges on the stones. A different coloured marker rope is provided to guide you in general about the filling level.
After filling is completed, close the ropes and bind the net with rope as shown here. Pass all the overhand ropes through the steel ring provided and knot it.
Once knotted through the steel ring, the FRN Gabion is safe to be lifted using the same ring. The filled FRN Gabions can be directly installed using lifting equipment or transported and installed in required sites. Ensure safe working conditions at all times.
GTFL standard terms and conditions apply and are subject to standard warranty terms document.
Downloadable Resources:
EROmasta FastRock - Product Spec Sheet
Applications:
- River training
- Erosion control
- Scour Protection
- Bank protection
- Flood control
- Embankment works
Specifications
Essential Characteristics | Performance | Test Standard | Harmonized Technical Specification | - |
Sr. No. | Product Type | Diameter (m) | Height (m) | Recommended Stone Fill Size |
Tensile strength MD Tensile strength CMD | MD- 25 kN/m minimum CMD- 8.5 kN/m minimum | EN ISO 10319 | EN 13249:2016, EN 13250:2016, EN13251:2016, EN 13253:2016, EN 13254:2016, EN13255:2016, EN 13256:2016, EN 13257:2016 | |
4 | 8T | 3.85 | 1 | >100mm |
3 | 4T | 2.2 | 0.85 | >50mm |
2 | 2T | 1.97 | 0.65 | >50mm |
1 | 1T | 1.5 | 0.5 | >50mm |
Elongation at Maximum load MD Elongation at Maximum load CMD | MD- 15 % minimum CMD- 75 % minimum | EN ISO 10319 | | |
Mass/ unit area | 195 gms/sq. Meter | ISO 9864 | | |
Thickness @ 2 kPa | 2mm | ISO 9863-1 | | |
Static Puncture strength (CBR) | 1500N | ISO 12236 | | |
Resistance to hydrolysis test | % Strength Retention > 85 | NF EN 12447 | | |
Microbiological resistance test | % Strength Retention > 80 | ENV ISO 12225 | | |
Resistance to chemical degradation mention A | % Strength Retention > 90 | ISO TR 12960 | | |
Resistance to chemical degradation mention B | % Strength Retention > 90 | ISO TR 12960 | | |
Resistance to weathering test | % Strength Retention > 85 | EN 12224 | | |
*Garware Technical Fibres Ltd. reserves the right to change the specifications without prior notice.